기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
하수처리장 송풍량 산정에 미치는 영향 인자들의 평가
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 하수처리장 송풍량 산정에 미치는 영향 인자들의 평가
저자명
김병수,최미영,권혁,김진만,차운오,전완명,Kim. Byoung Soo,Choi. Mi Young,Kwon. Hyuck,Kim. Jin Man,Cha. Woon Ou,Chun. Wan Myung
간행물명
대한환경공학회지
권/호정보
2013년|35권 1호|pp.38-44 (7 pages)
발행정보
대한환경공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

D하수처리장의 송풍량을 효과적으로 조절하는 시스템을 구축하기 위해 2011년 1월 1일부터 2012년 8월 31일까지 포기조 DO 농도를 평균 2.1 mg/L로 유지하면서 유입유량, 유입농도, 유입부하, 수온, F/M비, 생물반응조의 MLSS 농도 변화에 따른 송풍량 변화를 검토하였다. 그 결과 동일한 DO 농도를 유지하기 위한 송풍량 변화폭은 매우 크며, 송풍량 산정을 결정하는 주요 인자는 수온, F/M비, $BOD_5$ 유입 부하, T-N 유입 부하로 나타났다. 그 중 가장 큰 영향을 주는 지표는 수온으로 수온 $1^{circ}C$ 증가는 $45.8m^3/h$의 송풍량을 증가시키는 것으로 나타났으며, 이는 계절의 영향이 반영된 것으로 사료 된다. 하절기에는 유입 유량증가, 낮은 MLSS농도, F/M비 증가의 영향과, 동절기에는 유입 유량감소, 높은 MLSS농도, F/M비 감소 등의 영향이 송풍량에 반영되어, 수온 변화에 따른 필요 송풍량 변화를 더욱 가중시킨 것으로 사료된다. 따라서 호기조 송풍량 산정 시에는 유입유량, 유입 $BOD_5$농도, 유입 T-N농도 및 생물반응조의 MLSS농도 중 하나의 인자를 이용하는 것보다, 유입부하나 F/M비로 연산하여 접근이 필요한 것으로 사료된다.

기타언어초록

To construct the system controlling the aeration volume for D wastewater treatment plant effectively, the fluctuation of aeration volume was analyzed with changes of factors of the influent. As a result, the range of aeration volume was wide to maintain the certain concentration of DO, and the key factor to decide the aeration volume was found to be the temperature, F/M ratio, the loading rate of $BOD_5$ and T-N of the influent. Among the factors, the temperature of the influent had the most decisive effect on the aeration volume. The result showed that $45.8m^3/h$ of the aeration volume was needed with an increase of $1^{circ}C$ of the influent, and the effect of the season was considered. Since the temperature of the influent is affected by a change of season, same as F/M ratio, the loading rate of the influent and the concentration of MLSS, it seemed that the change of the temperature of the influent affects the aeration volume even more. Therefore, it is preferable to consider the loading rate of the influent and F/M ratio altogether, rather than considering only one factor when deciding aeration volume.