기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
Fabrication of EPDM Rubber/Organo-bentonite Composites: Influence of Hydrochloric Acid on the Characteristics of Modified Bentonite and Final Products
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • Fabrication of EPDM Rubber/Organo-bentonite Composites: Influence of Hydrochloric Acid on the Characteristics of Modified Bentonite and Final Products
  • Fabrication of EPDM Rubber/Organo-bentonite Composites: Influence of Hydrochloric Acid on the Characteristics of Modified Bentonite and Final Products
저자명
조을룡,Ge. Xin,Li. Mei-Chun,Cho. Ur Ryong
간행물명
폴리머
권/호정보
2014년|38권 1호|pp.62-68 (7 pages)
발행정보
한국고분자학회
파일정보
정기간행물|ENG|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

영문초록

고무 매트릭스와 벤토나이트의 상용성을 향상시키기 위하여 유기개질 벤토나이트는 벤토나이트 현탁액에서 실란커플링제인 [3-(2-aminoethylamino)propyl]trimethoxysilane(AEAPTMS)]를 사용하여 합성되었다. 유기개질 벤토나이트의 구조와 특성을 FTIR-spectroscopy, thermogravimetric analysis(TGA) and X-ray diffraction(XRD) 등을 사용하여 분석하였다. Ethylene-propylene-diene monomer(EPDM) 고무와 유기 벤토나이트를 two-roll mill에서 배합하였으며 가황을 하고 물성을 측정하였다. 벤토나이트 개질에 대하여 염산과 물의 농도가 복합체의 물성에 중요한 영향을 미치는 것으로 확인되었다. 벤토나이트의 함량이 20 phr 포함된 복합체의 경우 가장 좋은 물성을 나타내었고 인장강도는 1.95에서 4.8 MPa로 증가되었으며 신장률은 300에서 500%로 증가하는 경향을 보였다.

기타언어초록

To improve the compatibility of bentonite with rubber matrix, organo-modified bentonite was synthesized with a silane coupling agent, [3-(2-aminoethylamino)propyl]trimethoxysilane (AEAPTMS) in the suspension of bentonite. The structure and characteristics of organo-modified bentonite were investigated using FTIR-spectroscopy, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Ethylene-propylene-diene monomer (EPDM) rubber/organo-bentonite composites were compounded by a two-roll mill. The vulcanization and mechanical properties were studied. Results showed that the concentration of hydrochloric acid and $H_2O$ in the synthesis had significant influence on the modification of bentonite, which further contributed to the properties of the composites. Filled with 20 phr modified bentonite, the tensile strength and elongation at break of the rubber increased from 1.95 to 4.8 MPa and 300% to 500%, respectively.