기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
음향감쇠매질 내에서 집속초음파에 의한 온도상승의 가시화
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 음향감쇠매질 내에서 집속초음파에 의한 온도상승의 가시화
저자명
김명석,김정순,김무준,하강렬,Kim. Myoungseok,Kim. Jungsoon,Kim. Moojoon,Ha. Kanglyeol
간행물명
한국음향학회지= The journal of the acoustical society of Korea
권/호정보
2014년|33권 1호|pp.21-30 (10 pages)
발행정보
한국음향학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

음향감쇠매질 내에서 집속 초음파에 의한 온도 분포 변화를 파악하는 것은 다양한 분야에 매우 중요한 정보를 제공할 수 있다. 본 연구는 음향감쇠매질 내에 임계온도 $30^{circ}C$인 시온안료를 사용한 감온 필름을 삽입하여 비침습적으로 온도 상승 효과를 조사하였다. 음향감쇠매질은 한천과 설탕을 섞어 제작하였으며 매질내 음향특성을 제어하기위해 사용한 설탕 농도는 25 %에서 40 %까지 변화시켰다. 집속 초음파에 의한 온도상승 효과를 감온 필름의 변색영역의 변화로 관찰한 결과 초음파 방사 후 2~5 s 사이에 급격한 변색 영역의 증가를 보이다가 그 이 후 완만한 변화를 보였다. 시뮬레이션에서는 실험 결과와는 달리 초음파 방사후 10 s까지 선형적으로 변색영역이 증가하는 경향을 보였다. 이는 매질의 열전도도 및 열용량은 온도에 따라 변하는 값을 가지는데, 시뮬레이션에는 이를 고려하지 못했기 때문으로 사료된다.

기타언어초록

The temperature change due to focused ultrasound in dissipative acoustic medium is very important because it provides us much information. To measure the temperature change inside of the dissipative acoustic medium non-invasively, we adopt a temperature sensitive film which has thermochromic particles with critical temperature of $30^{circ}C$. As a dissipative acoustic medium, agar layer is chosen in the study. The temperature change due to the ultrasound was measured depending on the concentration of the sugar in the agar layer. The color change on the film due to the ultrasound was investigated when the concentration of sugar was from 25% to 40%. As the result, there were rapid increases of discolored area on the film within 2~5 second after the ultrasound driving and the increasing rates decreased after the period. To compare the simulation results were also shown. However in the simulated result, the discolored areas linearly increased from start to 10 seconds. The reason of the differences between the experimental results and simulated ones is that the change of thermal conductivity and heat capacity of the medium were not considered in the simulation program.