기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
파랑-지반-해안구조물의 상호작용에 기인하는 해저지반과 구조물의 동적응답에 관한 수치시뮬레이션
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 파랑-지반-해안구조물의 상호작용에 기인하는 해저지반과 구조물의 동적응답에 관한 수치시뮬레이션
저자명
이광호,백동진,김도삼,김태형,배기성,Lee. Kwang-Ho,Baek. Dong-Jin,Kim. Do-Sam,Kim. Tae-Hyung,Bae. Ki-Seong
간행물명
한국해안·해양공학회논문집
권/호정보
2014년|26권 1호|pp.49-64 (16 pages)
발행정보
한국해안해양공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

해안 및 해양구조물 하부의 해저지반에 고파랑이 장시간 작용하는 경우 과잉간극수압(진동과잉간극수압과 잔류과잉간극수압의 합)이 크게 발생할 수 있고, 이어지는 유효응력의 감소에 따라 해저지반에 액상화가 발생될 수 있다. 일단, 지반액상화가 발생 및 진행되면 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아진다. 특히, 중력식구조물이 설치된 하부지반내에서는 파작용에 의한 큰 과잉간극수압과 작은 유효응력으로 부터 발생되는 지반액상화의 여부를 정확히 예측할 필요가 있고, 이러한 지반의 동적거동 특성은 설계에 충분히 반영되어야 한다. 본 연구에서는 2차원수치파동수로를 불규칙파동장으로 확장한 수치해석법을 적용하여 해저지반상 및 구조물의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 해저지반응답용의 수치해석프로그램 FLIP(Finite element analysis LIquefaction Program)에 입력치로 적용하여 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 구조물의 시간변위를 정량적으로 평가한다. 이로부터 해저면상에서 전단응력을 고려한 경우 구조물 전면의 하부해저지반에서 액상화 가능성을 확인할 수 있었고, 액상화된 토립자는 흐름에 저항력을 상실하므로 세굴로 이어질 것으로 판단된다. 따라서, 태풍시 고파랑의 작용이 장시간 지속되는 경우 구조물의 전면에서는 지반액상화로 인한 지반강도의 현저한 저하로 구조물의 진동변위가 더욱 크게 발생되고, 더불어 구조물의 안정성에 영향을 미칠 것으로 예상된다.

기타언어초록

Seabed beneath and near the coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If the liquefaction occurs in the seabed, the structure may sink, overturn, and eventually fail. Especially, the seabed liquefaction behavior beneath a gravity-based structure under wave loading should be evaluated and considered for design purpose. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using 2-dimensional numerical wave tank. The 2-dimensional numerical wave tank was expanded to account for irregular wave fields, and to calculate the dynamic wave pressure and water particle velocity acting on the seabed and the surface boundary of the structure. The simulation results of the wave pressure and the shear stress induced by water particle velocity were used as inputs to a FLIP(Finite element analysis LIquefaction Program). Then, the FLIP evaluated the time and spatial variations in excess pore water pressure, effective stress and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the analysis, when the shear stress was considered, the liquefaction at the seabed in front of the structure was identified. Since the liquefied seabed particles have no resistance force, scour can possibly occur on the seabed. Therefore, the strength decrease of the seabed at the front of the structure due to high wave loading for the longer period of time such as a storm can increase the structural motion and consequently influence the stability of the structure.