자료유형
전체 선택해제
총 34건 검색
본문검색 결과만 보기
-
Flexural properties, interlaminar shear strength and morphology of phenolic matrix composites reinforced with xGnP-coated carbon fibers
Jong Kyoo Park, Jae Yeol Lee, Lawrence T. Drzal, Donghwan Cho 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 5 33-38 (6 pages)
by a direct coating method. The flexural properties, interlaminar shear strength, and the morphology of the xGnP-coated carbon fiber/phenolic matrix composites were investigated in terms of their longitudinal flexural strength and modulus, interlaminar shear strength, and by optical and scanning electron microscopic observations. The results were compared with a phenolic matrix composite counterpart prepared without xGnP. The flexural properties and interlaminar shear strength of the xGnP-coated... -
Experimental investigation of interlaminar mechanical properties on carbon fiber stitched CFRP laminates
Iwahori. Yutaka, Ishikawa. Takashi, Watanabe. Naoyuki, Ito. Akira, Hayashi. Yoichi, Sugimoto. Sunao 한국복합재료학회 Advanced composite materials : the official journal of the Japan Society of Composite Materials and 19 Pages
한국복합재료학회 Advanced composite materials : the official journal of the Japan Society of Composite Materials and 2007, Vol.16 No.2 95-113 (19 pages)
-
The electrical and heating properties of copper-incorporated graphite fibers fabricated using different ultrasonication techniques
Kyeong Min Lee, Min-Ji Kim, Hanjoo Jo, Sang Young Yeo, Young-Seak Lee 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 15 111-114 (4 pages)
weight, high manufacturing costs, and electromagnetic wave emissions [1,2]. To resolve these problems, carbon materials with good electrical conductivity, such as carbon fibers, graphite fibers, carbon nanotubes, and carbon black, have been examined as heating materials [3,4]. Among these carbon materials, graphite fibers possess many advantages compared to carbon fibers such as good mechanical and electrical properties, excellent chemical stability, high thermal conductivity, and so on [5-7]. -
Mechanical and electrical properties of epoxy resin/epoxidized castor oil/carbon fiber cloth composites
Fan-Long Jin, Heng Zhang, Shan-Shan Yao, Soo-Jin Park 한국탄소학회 Carbon Letters 5 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 12 105-109 (5 pages)
of outstanding mechanical, physical, and chemical properties and are among the materials most frequently used in the preparation of a large variety of composites [1-5]. CF-reinforced polymer composites have been widely used in many advanced technological fields, such as aerospace, engineering, sporting goods, automobiles, and marine industry during the past few decades due to their excellent properties, including high strength-to-weight ratios, light weight, high thermal and electrical... -
Fabrication of carbon fiber SMC composites with vinyl ester resin and effect of carbon fiber content on mechanical properties
Haksung Lee, Mongyoung Huh, Jaeyoung Yoon, Dasom Lee, Seonyul Kim, Shinjae Kang 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2017, Vol.22 11 101-104 (4 pages)
the automotive industry and other manufacturing fields. Their properties, including high specific stiffness, strength and weight reduction make fiber composite materials an attractive replacement for metal components. The development of composites like carbon fiber reinforced plastic and related production technologies have contributed to the increasing application of fiber composite materials. Many new components have recently been adapted, including structural parts such as roof frames, under... -
Effects of carbon additives on heat-transfer and mechanical properties of high early strength cement mortar
Dae-Geun Lee, Kyung Hoon Kim, Hyeong Gi Kim, Young-Seak Lee 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2016, Vol.20 11 72-75 (4 pages)
The repair of mortar-based structures is critically important because mortar-based structures such as buildings, bridges, tunnels, highway and roads are inevitably degraded by deterioration or damage. To save expense during construction and to avoid traffic congestion during repair work, it is very important to reduce construction time as much as possible. In order to reduce construction time, therefore, the setting time of mortars has to be shortened. The mortars which have short setting times... -
Effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites
Jae Il Lim, Kyong Yop Rhee, Hyun Ju Kim, Dong Ho Jung 한국탄소학회 Carbon Letters 4 Pages
한국탄소학회 Carbon Letters 2014, Vol.15 No.2 9 125-128 (4 pages)
using scanning electron microscopy (SEM). The results showed that the flexural strength and flexural modulus of the CSBC specimen respectively were ~32% and ~245% greater than those of the BSCC specimen. However, the interlaminar fracture toughness of the CSBC specimen was ~10% smaller than that of the BSCC specimen. SEM results on the fracture surface showed that matrix cracking is a dominant fracture mechanism for the CSBC specimen while interfacial debonding between fibers and epoxy resin is... -
Mechanical Properties of Unidirectional Carbon-carbon Composites
S.R.Dhakate, R.B.Mathur, T.L.Dhami 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2002, Vol.3 No.3 1 127-132 (6 pages)
-
Mechanical Properties of MWNT-Loaded Plain-Weave Glass/Epoxy Composites
Kim. Myung-Sub, Lee. Sang-Eui, Lee. Won-Jun, Kim. Chun-Gon 한국복합재료학회 Advanced composite materials : the official journal of the Japan Society of Composite Materials and 11 Pages
한국복합재료학회 Advanced composite materials : the official journal of the Japan Society of Composite Materials and 2009, Vol.18 No.3 209-219 (11 pages)
-
Graphitization of PAN-based carbon fibers by CO₂ laser irradiation
Liangbo Yao, Weimin Yang, Sanyang Li, Yang Sha, Jing Tan, Ying An, Haoyi Li 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 13 97-102 (6 pages)
electron microscopy revealed that the surface of irradiated CFs was rougher than that of the unirradiated ones and there were scale-like small fragments that had peeled off from the fibers. The tensile modulus increased by 17.51% and the Weibull average tensile strength decreased by 30.53% after being irradiated by a laser. These results demonstrate that the laser irradiation was able to increase the graphitization degree of the CFs, which showed some properties comparable to graphite fibers. -
Effect of the surface modification using MWCNTs with different L/D by two different methods of deposition on the IFSS of single carbon fiber-epoxy resin composite
Minerva L. Herrera-Sosa, Alex Valadez-Gonz?lez, Humberto V?zquez-Torres, Pierre G. Mani-Gonz?lez, Pedro J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2017, Vol.24 3 18-27 (10 pages)
Multiwall carbon nanotubes (MWCNT) with two different (L/D) aspect ratios (7±2 μm/140±30 nm and 0.5?2 μm/8?15 nm) were surface treated using nitric acid (HNO3) and polyethyleneimine (PEI) prior to their deposition on carbon fibers (CF). Before the hierarchical reinforcement with CF-MWCNT, the CFs were treated with 3-glycidoxypropyltrimethoxysilane, a coupling agent (Z6040) and with poly(amidoamine) (PAMAM) a dendrimer containing an ethylenediamine core and amine surface groups. The MWCNT... -
Effect of fiber-matrix adhesion on the fracture behavior of a carbon fiber reinforced thermoplastic-modified epoxy matrix
H.J. Carrillo-Escalante, A. ?lvarez-Castillo, A. Valadez-Gonz?lez, P. J. Herrera-Franco 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 6 47-56 (10 pages)
In this study, the fracture behavior of a thermoplastic-modified epoxy resin reinforced with continuous carbon fibers for two levels of fiber-matrix adhesion was performed. A carbon fiber with commercial sizing was used and also treated with a known silane, (3-glycidoxy propyl trimethoxysilane) coupling agent. Toughness was determined using the double cantilever test, together with surface analysis after failure using scanning electron microscope. The presence of polysulfone particles improved... -
Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview
Donghwan Cho, Lawrence T. Drzal 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2016, Vol.19 1 1-11 (11 pages)
on the properties of PETI-5 matrix composites are also reviewed. The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and... -
A review: role of interfacial adhesion between carbon blacks and elastomeric materials
Min-Joo Kang, Young-Jung Heo, Fan-Long Jin, Soo-Jin Park 한국탄소학회 Carbon Letters 10 Pages
한국탄소학회 Carbon Letters 2016, Vol.18 1 1-10 (10 pages)
Carbon blacks (CBs) have been widely used as reinforcing materials in advanced rubber composites. The mechanical properties of CB-reinforced rubber composites are mostly controlled by the extent of interfacial adhesion between the CBs and the rubber. Surface treatments are generally performed on CBs to introduce chemical functional groups on its surface. In this study, we review the effects of various surface treatment methods for CBs. In addition, the preparation and properties of CB-reinforced... -
Mechanical interfacial adhesion of carbon fibers-reinforced polarized-polypropylene matrix composites: effects of silane coupling agents
Woong-Ki Choi, Hyun-Il Kim, Shin-Jae Kang, Young Sil Lee, Jong Hun Han, Byung-Joo Kim 한국탄소학회 Carbon Letters 6 Pages
한국탄소학회 Carbon Letters 2016, Vol.17 No.1 12 79-84 (6 pages)
-
The effects of stacking sequence on the penetration-resistant behaviors of T800 carbon fiber composite plates under low-velocity impact loading
Furqan Ahmad, Jung-Wuk Hong, Heung Soap Choi, Soo-Jin Park, Myung Kyun Park 한국탄소학회 Carbon Letters 9 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 6 107-115 (9 pages)
Impact damages induced by a low-velocity impact load on carbon fiber reinforced polymer (CFRP) composite plates fabricated with various stacking sequences were studied experimentally. The impact responses of the CFRP composite plates were significantly affected by the laminate stacking sequences. Three types of specimens, specifically quasi-isotropic, unidirectional, and cross-ply, were tested by a constant impact carrying the same impact energy level. An impact load of 3.44 kg, corresponding to... -
Preparation and characterization of carbon fiber-reinforced thermosetting composites: a review
Fan-Long Jin, Soo-Jin Park 한국탄소학회 Carbon Letters 11 Pages
한국탄소학회 Carbon Letters 2015, Vol.16 No.2 1 67-77 (11 pages)
of properties which allow them to be widely used as reinforcing materials in advanced polymer composites. The mechanical properties of CF-reinforced polymer composites are governed mainly by the quality of interfacial adhesion between the CFs and the polymer matrix. Surface treatments of CFs are generally carried out to introduce chemical functional groups on the fiber surfaces, which provide the ability to control the surface characteristics of CFs. In this study, we review recent experimental...
