기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
고온용 유리 봉합재의 filler 첨가효과
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 고온용 유리 봉합재의 filler 첨가효과
저자명
손용배,김상우,김민호
간행물명
마이크로전자 및 패키징 학회지
권/호정보
1999년|6권 1호|pp.51-58 (8 pages)
발행정보
한국마이크로전자및패키징학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

지르코니아에 접합과 반응성이 정합되며 고온에서 물리화학적으로 안정성을 갖는 접합재를 제조하기 위하여 silicate계 유리의 조성에 따른 적심특성, 결정화 및 반응성등 제반 특성을 고찰하였다. 지르코니아와의 열팽창계수가 정합 될 수 있는 유리계에 대한 조성 실험하였다. Alkaline earth silicate 유리는 적심성이 우수하였으며 적심각이 낮으며 $B_2O_3$의 첨가함로써 유리의 점도를 조절 및 결정화를 억제할 수가 있었다. $900^{circ}C$ 이하에서 적심공정에 일어났으며 $800^{circ}C$에서 10시간동안 유지한 후에 결정화와 계면 반응을 조사한 결과 기공이 많이 발생하였으며 $B_2O_3$를 15mo1% 첨가한 경우 흐름성이 증가하였으며 기판과의 반응성이 높아졌다. 기공을 없애기 위해서는 공정변수를 조절하여 유리의 소결을 촉진할 필요가 있으며 유리점도와 반응성에 관한 최적화가 요구된다. 본 연구에서는 유리-세라믹필러 복합체의 고온적심성에 대하여 조사하였다. Filler로서 $ZrO_2$분말을 여러 조건으로 열처리하여 분말종류와 첨가량에 따라 기공, $ZrO_2$ filler의 형상 및 계면반응 등을 고찰하였다.

기타언어초록

The effects of glass composition on the wettability and reactivity with $ZrO_2$substrate was evaluated and fabrication variables and glass compositions was investigated. Various glass compositions was investigated. Alkaline earth silicate glass show good wettability and lower viscosity and crystallization of glass could be prevented by $B_2O_3$.The sealant glass begin to wet on $ZrO_2$substrate below $900^{circ}C$ and porosity occurred in various glass compositions, the crystallization and porosity in the glass could be prevented by the addition of flux into glass composition. But flowability and reactivity of glass with $ZrO_2$substrate was enhanced. Processing variables should be optimized to reduce the porosity by enhancing the sintering of glass powder. Many silicate glasses were investigated for the applications of high temperature sealants. Wetting and bonding of glass was good enough to seal together between $ZrO_2$and other ceramic components of SOFC. But porosity and reaction layer were occurred in the sealant glass. It will be possible to produce glass sealant without porosity and reaction layer at the interface by optimization of processing variable and modify the glass compositions. In present study, wettability of glass-filler composite was investigated. The porosity, shape of filler and interfacial reactions of sealant glass with fillers were examined.