기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
BASINS/HSPF와 연계한 유황별 비점유달부하량 산정방법 개발
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • BASINS/HSPF와 연계한 유황별 비점유달부하량 산정방법 개발
저자명
이용운,송광덕,이재춘,윤광식,류덕희,이수웅,이신후,Lee. Yong-Woon,Song. Kwang-Duck,Lee. Jae-Choon,Yoon. Kwang-Sik,Rhew. Doug-Hee,Lee. Su-Woong,Lee. Shi
간행물명
대한환경공학회지
권/호정보
2010년|32권 2호|pp.175-184 (10 pages)
발행정보
대한환경공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

본 연구에서는 유역모형인 BASINS/HSPF와 연계하여 비점유달부하량을 유황별(갈수기, 저수기, 평수기 등)로 산정하는 방법을 개발하고, 이를 전남지역에 위치한 동복천 유역에 적용하여 그 효용성을 평가하였다. 동복천 유역에 대한 BASINS/HSPF 모형의 보정 검증결과는 유출유량, BOD 및 T-P의 신뢰도지수가 각각 1.59, 1.41, 1.28로서 실측값과 예측값의 유사성은 높게 나타났다. 이와 같이 구축된 BASINS/HSPF 모형을 사용하여 동복천 유역의 갈수기, 저수기, 평수기에 대한 BOD와 T-P 비점유달부하량을 각각 구하면, 연간 일평균 비점배출부하량과 대비하여 0.36과 1.09, 0.82와 2.19, 6.02와 16.90이였다. 이러한 결과는 비점유달부하량을 유황별로 산정하여 서로 다르게 반영할 필요성이 있음을 보여주고 있으며, 이러한 경우에 본 연구에서 개발한 유황별 비점오염유달부하량 산정방법은 유용하게 사용될 수 있을 것이다.

기타언어초록

The purpose of this study is to develop a method for estimating the non-point pollutant delivery load of each reference flow(flows of dry, low, normal, abundant and flood seasons) with combination of BASINS/HSPF. The effectiveness of this method is evaluated by applying it to the watershed of Dongbok stream. The flow, BOD and T-P reliability indices(RI) of the BASINS/HSPF for the watershed of Dongbok stream are 1.59, 1.41, 1.28, respectively, and thus the similarity between measured and estimated values is high. The non-point pollutant load delivery ratios of BOD and T-P for the flows of dry, low and normal seasons, which are estimated by such constructed BASINS/HSPF, are 0.36 and 1.09, 0.82 and 2.19, 6.02 and 16.90, respectively, as compared with daily average of non-point loads for a year. These results show that the non-point pollutant delivery load should be estimated and applied for each reference flow, and in this case the method for estimating the non-point pollutant delivery load of each reference flow can be useful.