기관회원 [로그인]
소속기관에서 받은 아이디, 비밀번호를 입력해 주세요.
개인회원 [로그인]

비회원 구매시 입력하신 핸드폰번호를 입력해 주세요.
본인 인증 후 구매내역을 확인하실 수 있습니다.

회원가입
서지반출
철과 망간이 동시에 코팅된 다기능성 모래를 이용한 용존 Mn(II) 제거
[STEP1]서지반출 형식 선택
파일형식
@
서지도구
SNS
기타
[STEP2]서지반출 정보 선택
  • 제목
  • URL
돌아가기
확인
취소
  • 철과 망간이 동시에 코팅된 다기능성 모래를 이용한 용존 Mn(II) 제거
저자명
임재우,장윤영,양재규,Lim. Jae-Woo,Chang. Yoon-Young,Yang. Jae-Kyu
간행물명
대한환경공학회지
권/호정보
2010년|32권 2호|pp.193-200 (8 pages)
발행정보
대한환경공학회
파일정보
정기간행물|
PDF텍스트
주제분야
기타
이 논문은 한국과학기술정보연구원과 논문 연계를 통해 무료로 제공되는 원문입니다.
서지반출

기타언어초록

복합 오염물질 처리를 위해 제조한 다기능성 흡착제인 철과 망간이 동시에 코팅된 모래(Iron and Manganese Coated Sand, IMCS)를 이용하여 용존 Mn(II) 처리 특성을 평가하였다. 실험에 사용된 IMCS는 0.05 M의 Mn(II)과 Fe(III) 용액을 pH 7에서 혼합하여 담체로 쓰인 모래에 코팅하여 제조하였다. IMCS는 ${gamma}-MnO_2$ 형태의 Mn 산화물과 goethite 및 magnetite($F_{e3}O_4$) 형태의 철산화물이 동시에 존재하는 것으로 나타났다. Mn과 Fe의 함유량은 각각 826 및 1676 mg/kg으로 분석되었으며 $pH_{pzc}$는 6.40으로 측정되었다. IMCS와 산화제로서 NaOCl과 $KMnO_4$를 이용하여 Mn(II)의 제거에 관한 회분식 실험을 pH, 시간, 주입 농도를 변수로 하여 수행하였다. IMCS를 이용하여 Mn(II)을 처리하였을 때, pH 7.4에서 약 34%의 제거율을 나타내었고, 산화제인 NaOCl(13.6 mg/L)을 주입 후 IMCS와 반응시킨 결과 pH 7.0에서 96%의 제거율을 나타냈고, $KMnO_4$(4.8 mg/L)을 이용한 경우 pH 7.6에서 89%의 제거율을 나타내었다. IMCS와 산화제를 이용하여 Mn(II)을 제거할 경우, 용액의 pH가 증가함에 따라 제거율이 증가하는 양이온 형태의 제거 경향을 따랐으며, 반응 시간 6시간이 경과 후 거의 일정한 상태에 도달하는 것으로 나타났다. IMCS만을 이용하여 Mn(II)을 제거한 경우 833.3 mg/kg의 최대제거량을 나타냈고, 산화제로 NaOCl(13.6 mg/L), $KMnO_4$(4.8 mg/L)를 주입 후 IMCS와 반응시킨 경우 최대제거량은 각각 1428.6 및 1666.7 mg/kg으로 나타났다. IMCS에 의한 Mn(II)의 제거는 2차 반응속도식 및 Langmuir 식으로 잘 표현되었다.

기타언어초록

This study evaluated treatability of soluble Mn(II) using multifunctional sand media simultaneously coated with iron and manganese. In the preparation of IMCS(Iron and Manganese Coated Sand), 0.05 M Mn(II) solution and Fe(III) solution was mixed with sand at pH 7. The mineral type of IMCS was identified as the mixture of ${gamma}-MnO_2$, goethite and magnetite($F_{e3}O_4$). The contents of Mn and Fe coated onto sand were 826 and 1676 mg/kg, respectively. The $pH_{pzc}$ of IMCS was measured as 6.40. The removal of soluble Mn(II) using IMCS and oxidants such as NaOCl and $KMnO_4$ was investigated with variation of the solution pH, reaction time and Mn(II) concentration in a batch test. The removal of Mn(II) on IMCS was 34% at pH 7.4 and the removals of Mn(II) on IMCS in the presence of NaOCl(13.6 mg/L) at pH 7 and $KMnO_4$(4.8 mg/L) at pH 7.6 were 96% and 89%, respectively. The removal of Mn(II) using IMCS and oxidants followed a typical cationic type, showing a gradual increase of removal as the solution pH increased. The removal of Mn(II) was rapid in the first 6 hrs and then a constant removal was observed. The maximum removed amount of Mn(II) on IMCS-alone and IMCS in the presence of oxidants such as NaOCl(13.6 mg/L) and $KMnO_4$(4.8mg/L) were 833.3, 1428.6 and 1666.7 mg/kg, respectively. Mn(II) removal onto the IMCS in the presence of oxidants was well described by second-order reaction and Langmuir isotherm expression.