Since IT technology was combined with the power system, many systems and applications have been developed and also Integration between systems has been followed in order to meet much higher level. Futher more to reduce the cost of system integration there were needs standardized data model and interfaces among systems or applications. so IEC has reached to establish standard interfaces and data model. Most of the current distribution automation system in South Korea, each operating independently in an enclosed environment, are managed. As time goes by, however, because of resons that the system is increasingly complex by implenting new kind of power source and demand for electricity is rapidly increasing, it became difficult to predict with a independent data from one system. In this paper, In order to apply common infomation model and standard interfaces which are defined in IEC 61970/61968 to the exisiting distribution automation system in KEPCO, several software tools and applications which have been created will be introduced.